4PCS TPMS FOR Mazda 2 3 5 6 CX-5 CX-6 CX-9 MX-5 Artz 433MHz BHB637140A TPMS SENSOR TIRE AIR PRESSURE SENSOR BHB637140 GS1D37140

Selling Point
Note1:
Pls Use the vehicle fitment we’ve provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order.
Note2:
【No sensor programming Required】 :
The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or “re-learning”.
Simplified Relearn : OBDII required
Installation of TPMS is recommended to be performed only by trained professionals.
Application
For Fiat 124(from 2016-04 to 2023-06)
For Mazda 2(from 2015-01 to 2021-08)
For Mazda 2 (DE)(from 2007-07 to 2014-12)
For Mazda 3(from 2008-11 to 2013-05)
For Mazda 5 (CW)(from 2010-10 to 2018-09)
For Mazda 6(from 2007-12 to 2012-09)
For Mazda 6(from 2012-10 to 2020-12)
For Mazda CX-3 (DJ1)(from 2015-02 to 2019-06)
For Mazda CX-5 (GH)(from 2012-01 to 2017-01)
For Mazda CX-5 (KF)(from 2017-02 to 2020-03)
For Mazda CX-7 (ER)(from 2006-02 to 2014-10)
For Mazda CX-9 (TB1)(from 2007-03 to 2016-05)
For Mazda MX-5 (NC1)(from 2005-12 to 2015-05)
For Mazda MX-5 IV (ND)(from 2015-06 to 2022-03)
SPECIFICATION :
Replace For Part Number:
BHB6-37140A, BHB637140A, BHB637140, GS1D37140, BBP337140, BBP337140A, BBP337140B
Battery Life: ABOUT 3 YEARS
Operating Frequency: 433MHz
PACKAGE CONTENT :
NORMAL PACKET
COMPREHENSIVE VEHICLE COVERAGE
Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
FAQ
Q:【 Frequently of TPMS sensor】
A: 433mhz
Q: 【Did they tpms sensor need to make program】
A: The Tire Pressure Sensor come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or “re-learning”.
Q:【 Relearn Procedure 】
A: Auto-relearn